34125A

• 34000A Series has its own control and display panel, CC / CR / CV / CP / Dynamic modes, 150 sets Store / Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.
• SHORT time setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
• Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input for a Arbitrary Waveform to simulate load current.
• Single key for OCP、OPP test function will be more efficiency and accuracy on OCP、OPP testing.
• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display ” + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
• 150 sets test parameter and status storage function, user can recall the storage memory real time in accordance with the auto sequence requirement.
• Maximum Voltage up to 1000V provide an idea testing solution for Power Factor Correction test.
• Master / Slave control units maximum up to 1 MASTER, 7 SLAVE.

Features

• With parallel function maximum power up to 320KW.
• Maximum up to 8 units master / slave parallel control.
• 5 digit V/A/W Meter.
• High-speed measurement and communication transmission.
• Large LCD Display、setting values can be adjusted by rotary knob or push button.
• Voltage、Current and Watt value can be displayed simultaneously.
• Capable for Power Factor Correction (PFC) Test. (for 600V,1000V models)
• OCP、OPP test function automatically.
• Power ON status can be set.
• CC, CR, CV, CP , download.jpg CC+CV  ,  CP+CV ,  Dynamic and Short operation mode.
• SHORT time setting.
• Protections against I,W,°C and over-voltage alert.
• Voltage meter display the polarity positive（”＋”）or negative（”－”）is selectable.
• Optional Interface : GPIB、RS232、USB、
• Support MPPT CC、CR、CV test function for solar panel
• 7V @ 1000A is on Static condition, and the starting voltage must be greater than 5V, if on Dynamic condition that is 5V @ 1000A
• Built-in soft-start circuit function allowing the U.U.T. power supply to be directly connected to the 342XA、343XA series load input terminal, no longer need a large relay switch with an external soft-start circuit.
• New waveform generator plug in model 9923 adds user programmable battery dischargecurrent waveform simulation to Prodigit DC Loads