Voltage-Current Combinations (12KW)

Features

• All Wide Range AC/DC power supplies; AC mains 180~460V, DC output 0~80V/540A to 0~1950V/27A.
• Each DSP-WR DC power supply can contain up to three power modules. Each power module runs on 3-phase Vac input,
• keeping the AC mains in balance, and complying with worldwide power distribution standards.
• 32 models give a range of DC power supplies output from 5kW to 18kW.
• Built-in, patented synchronizing circuitry allows easy integration of 100 units DC power supplies to form an 1800kW power system.( more1 )( more2 )
• Active power factor correction, PF>0.99(480V input).
• Efficiency >95%+.

Electrical

• MHz switching frequency (15kW and 18kW models) with extremely low output ripple and noise DC power supplies.
• Multiple 32-bit ARM based embedded system gives a rapid boot of 10 seconds or less.
• Wide Bandgap power semiconductors such as the SiC MOSFET SBD give better performance on DC power supplies, higher ( more )
• efficiency, and lower heat dissipation, increasing the range of acceptable ambient temperatures for use.
• Adjustable output voltage, current and power.
• Provide True RMS current and True Watt readings.
• Constant Voltage(CV), Constant Current(CC) and Constant Power(CP) , CV. CC. or CP working priority setting.( more )
• Internal resistance adjustment function allows battery simulation.( more )
• 18 bit DAC for Setting and 24 bit ADC for Measurement.
• Built-in Real Time Clock gives reliable time even when disconnected from a time server.
• It is possible to customize time synchronization to a time server.
• Remote sense functionality compensation voltage up to 5V.

Operational

• 5″ touch screen with 3 definable background colors, 3 spin knobs with push-select and two push
• buttons give a clear and intuitive control.
• Patented multi-function HOME/RETURN key.
• Patented output ON/OFF button gives an extra layer of safety, allowing powered output only when
• Two kinds of output mode which can be changed following adjustment or after confirmation.
• both internal switches are triggered.
• Programmable over-voltage and over-current protection.
• Programmable output ramp-up and ramp-down protect the device under test.
• Up to 8000 sets of V/A/W data at 1ms intervals can be recorded and stored.
• Three sets of settings can be stored and recalled from the front panel.
• DSP-WR Series remote control application software gives control and sequence data setting to the DC power supply.
• Data logging is timestamped.

Safety

• User definable power ON mode (LAST、Output OFF or ON)
• The DSP-WR series DC power supply is fully protected from Reverse EMF through thoughtful design, as shown below.( more )
• Closed-case firmware upgrading and enhanced protection to prevent upgrade failures.
• All DSP-WR DC power supplies models automatically discharge voltage to a safe range within 10 seconds of output being switched off.( more )
• Intelligent stepless speed controlled fans reduce acoustic noise while keeping system temperature low.
• The DSP-WR series DC power supplies allow you to specify the slew rates for Voltage, Current, and Power.( more )
• DSP-WR DC power supply units are qualified for CE approved, Filled Transport Packages approved, and Vibration Test approved shipping cases.

Interface

• Two LAN ports(LXI 1.4 approved) minimize wiring and reduce network complexity.
• Interface slot allows optional GPIB, RS422+485+USB, or Isolated Analog connections.
• Supports SCPI commands.
• Provides IVI-COM driver.
• Alarm signal output and Interlock mechanism prevent possible injury.
• Optional isolated analog programming port, 0~5V or 0~10V for setting and monitoring output V/A/W.
• USB port gives easy data access. (*4)
• Customized software gives an easy comparison between wide-range(auto-ranging) and traditional DC power supplies. (*5)

High Power/Current/Voltage Wide Range Output DC power supplies meet all Applications

• Aerospace and Satellite Test
• Semiconductor Equipments
• New Energy R&D
• Solar Cell/Array Application
• DC to DC Convertors，DC to AC Invertors
• Contact/Connector Testing
• MOCVD
• Sputtering and Coating
• Chemical Treatment
• Water Purification
• Heat Processing
• IEC 60127-1
• Battery Testing
• Vehicle Electronics
• LED Testing
• Lighting
• Telecom and IT Industries
• Automated Test Equipment
• Factory Automation
• QC Testing
• Electronic Anti-rust