3310G Series (800W)
3319G / 3319-M
3319G / 3319-M
DC Electronic Load
Model : 3319G / 3319-M Current : 40A Voltage : 500V Power : 800W
- 3317G / 3317G-M / 3319G / 3319G-M has its own control and display panel, CC / CR / CV / CP / Dynamic modes, with 150 sets Store / Recall memory which provides load set-up more efficiently, also can be controlled via RS232、Ethernet、USB and GPIB interface。
- The new Turbo mode is designed for overload or protection testing, which includes OCP, OPP, Short for AC / DC or DC/DC power source ; Over Charge / Discharge and Short for Battery BMS protection ; and Blow/Not Blow testing for Fuse, Breaker or PTC Current Protection Components.
- Support Short, OCCP and OCDP protection tests for battery BMS protection testing, the peak current before protection and protection response time are measured.
- BMS, Fuse, OCP and OPP single-key test functions make test more efficient.
- Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input so that load can have a simulated Specific Load Current Waveform, optional 9923 Load Current Waveform Generator is able to support real current waveform testing.
- SHORT duration setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current.
- Programmable LOAD ON/OFF voltage, GO/NG meter check, Voltage meter display “ + ” or “ – “ is selectable and 150 sets Store / Recall larger memory is much advance feature for each different application.
- 150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement，at any time to tune out the stored memory for use.
Title
File
데이터가 없습니다.
Title
File
데이터가 없습니다.
Title
File
데이터가 없습니다.
Title
File
데이터가 없습니다.
Title
File
데이터가 없습니다.
카테고리가 존재하지 않습니다.
